menu.trunks = Trunks
module.trunks = Trunks
trunks = Trunks
trunks.advanced = Advanced
trunks.class_of_service_id = Class of Service
trunks.class_of_service_id.tooltip = Class of services for trunk dial plan access.
trunks.codecs = Codecs
trunks.codecs.tooltip = List of allowed codecs. The order in which the codecs are listed determines their order of preference. If you select at least one codec, the "disallow=all" parameter will be also generated.
trunks.custom_settings = Custom Settings
trunks.dahdi_trunk_parameters = DAHDi Trunk Parameters
trunks.description = Description
trunks.description.tooltip = Short Description to identify this trunk
trunks.device_for_incoming_calls = Device for Incoming Calls (User)
trunks.device_for_outgoing_calls = Device for Outgoing Calls (Peer)
trunks.dialoptions = Dial Options
trunks.dialoptions.tooltip = Dial Options Parameters
trunks.dialstring = Dialstring
trunks.disable = Disable Trunk
trunks.disable.tooltip = This allows you to disable this trunk to be inaccessible.
trunks.general = General
trunks.group_id = Channel Group
trunks.group_id.tooltip = The channel group used by this trunk.
trunks.group_mode = Mode
trunks.group_mode.tooltip = Selection mode for available channels.
trunks.incoming_defaultuser = Remote Username
trunks.incoming_defaultuser.tooltip = Authentication username for remote server
trunks.incoming_host = Host
trunks.incoming_host.tooltip = Address of calling SIP server
trunks.incoming_qualify = Qualify
trunks.incoming_qualify.tooltip = Makes sure that is alive
trunks.incoming_remotesecret = Remote Secret
trunks.incoming_remotesecret.tooltip = Authentication secret for remote server
trunks.incoming_secret = Local Secret
trunks.incoming_secret.tooltip = Secret to be used for authentication requests from remote server.
trunks.incoming_trunk = IAX Trunking
trunks.incoming_trunk.tooltip = Allows sending voice of several calls in one IAX packet. It can significantly reduce the required network bandwidth.
trunks.incoming_type = IP Authentication
trunks.incoming_type.tooltip = If checked, allows the incoming requests authentication by IP address in addition to the username authentication.
trunks.incoming_username = Username
trunks.incoming_username.duplicate = Incoming Username already exist (must be unique)
trunks.incoming_username.tooltip = Username the remote server should use to contact this PBX. It is also the device name that will be created.
trunks.insecure = Insecure
trunks.insecure.invite = Invite
trunks.insecure.invite.tooltip = Do not require authentication of incoming INVITES'
trunks.insecure.not_used = Not used
trunks.insecure.port = Port
trunks.insecure.port.tooltip = Allow matching of peer by IP address without matching port number
trunks.insecure.port_invite = Port, Invite
trunks.insecure.port_invite.tooltip = The combination is the minimum security since no checking or port check or authentication to the INVITE message type.
trunks.insecure.tooltip = Allows relaxing authentication of incoming SIP requests.
trunks.music_group_id = Music on Hold
trunks.music_group_id.tooltip =
    This option specifies which music on hold class to suggest to the peer channel when placing an outbound call on hold.
    Enabling this will override the MOH setting specified in the advanced extension settings for external outbound calls.
trunks.outgoing_defaultuser = Remote Username
trunks.outgoing_defaultuser.tooltip = Authentication username for remote server
trunks.outgoing_fromdomain = From Domain
trunks.outgoing_fromdomain.tooltip = Replaces the domain part in the "From" header field. Sometimes required for proper authentication on remote server. Otherwise, the local IP address is used.
trunks.outgoing_fromuser = From User
trunks.outgoing_fromuser.tooltip = Replaces the SIP user name in the "From" header field. Sometimes required for proper authentication on remote server.
trunks.outgoing_host = Remote Host
trunks.outgoing_host.duplicate = The remote host is required
trunks.outgoing_host.tooltip = Remote server address
trunks.outgoing_port = Remote Port
trunks.outgoing_port.tooltip = The port number we want to connect to on the remote side
trunks.outgoing_qualify = Qualify
trunks.outgoing_qualify.tooltip = Makes sure that is alive
trunks.outgoing_remotesecret = Remote Secret
trunks.outgoing_remotesecret.tooltip = Authentication secret for remote server
trunks.outgoing_secret = Local Secret
trunks.outgoing_secret.tooltip = Secret to be used for authentication requests from remote server.
trunks.outgoing_trunk = IAX Trunking
trunks.outgoing_trunk.tooltip = Allows sending voice of several calls in one IAX packet. It can significantly reduce the required network bandwidth.
trunks.outgoing_type = Allow Inbound Calls
trunks.outgoing_type.tooltip = If checked,  this device will be allowed also to accept calls.
trunks.outgoing_username = Local Username
trunks.outgoing_username.duplicate = The provided local username already exists (must be unique)
trunks.outgoing_username.tooltip = Username the remote server should use to contact this PBX. It is also the device name that will be created.
trunks.overwrite_cid = Overwrite CID
trunks.overwrite_cid.tooltip = Overwrite Caller ID.
trunks.register_flag = Use Default
trunks.register_flag.tooltip = Use default Register String
trunks.register_string = Register String
trunks.restricted = Trunk Default
trunks.ringtimer = Ring Time
trunks.ringtimer.tooltip = Time to ring the trunk
trunks.technology = Technology
trunks.technology.iax2 = IAX2
trunks.technology.sip = SIP
trunks.technology.telephony = Telephony
trunks.technology.tooltip = Trunk Technology
trunks.trkcustom.enabled = Enabled
trunks.trkcustom.param = Parameter
trunks.trkcustom.type = Type
trunks.trkcustom.type.friend = Friend
trunks.trkcustom.type.peer = Peer
trunks.trkcustom.type.user = User
trunks.trkcustom.value = Value
trunks.trunk_cid = Trunk CID
trunks.trunk_cid_number.invalid = Trunk CID is invalid. Only *,#,+ and numbers are allowed.
trunks.trunk_cid.tooltip = Caller ID for this trunk.
trunks.trunk_cid_name = Trunk CID Name
trunks.trunk_cid_number = Trunk CID Number
trunks.cos.warning = The action you are about to perform may create security vulnerabilities. <b>Do not proceed unless you are sure you understand the logic of Class of Service for trunks.</b>
trunks.cos.warning.title = Warning
trunks.cos.warning.confirm = I understand and confirm
trunks.cos.warning.cancel = Cancel my change
trunks.dial_profile_id = Dial Profile
trunks.dial_profile_id.tooltip = Profile with the dial options to use when this trunk is dialed.
trunks.outgoing_username.invalid = Please enter a valid device name. Alphanumeric value with dash, underscore and plus sign are allowed
trunks.nat = Nat
trunks.continue_on_busy = Continue on Busy
trunks.continue_on_busy.tooltip =
	It force to continue the call to the next configured trunk when this trunk being busy. <br><br> <b>Note: </b> The call will
	also continue to the next trunk if any error happens, even if this checkbox is not checked.
trunks.validation.duplicated_outgoing_username = The provided outgoing username is being used by another trunk
trunks.validation.duplicated_description = The provided description is being used by another trunk
trunks.validation.same_username = The username for outgoing and incoming calls are the same. Please, use different username for both fields
trunks.validation.duplicated_incoming_username = The provided username in the incoming calls section is being used by another trunk
trunks.validation.no_outgoing_username = The outgoing username has not been provided
trunks.validation.no_outgoing_host = The outgoing host has not been provided
trunks.simultaneous_calls = Simultaneous Calls
trunks.simultaneous_calls.tooltip = It allows you to define the amount of simultaneous outgoing calls allowed for this trunk.
trunks.plain_mode = Switch to Text Mode
trunks.visual_mode = Switch to Visual Mode
trunks.outgoing_settings = Peer Parameters
trunks.outgoing_settings.tooltip = Peer parameters supplied by your VoIP provider
trunks.incoming_settings = User Parameters
trunks.incoming_settings.tooltip = User parameters supplied by your VoIP provider
trunks.no_outgoing_settings = There are not outgoing settings defined on this trunk
trunks.rules = Dialing Manipulation Rules
trunks.rules.prepend = Prepend
trunks.rules.prefix = Prefix
trunks.rules.pattern = Pattern
trunks.rules.enabled = {trunks.trkcustom.enabled}
trunks.get_did_from = Get DID From
trunks.get_did_from.to = To
trunks.get_did_from.tooltip = It allows you to define from which SIP header will be extracted the DID number
trunks.get_cid_from = Get CID From
trunks.get_cid_from.tooltip = It allows you to define from which SIP header will be extracted the caller ID info
trunks.get_cid_from.from = From
trunks.get_cid_from.contact = Contact
trunks.outbound_registration_settings = Outbound Registration Settings
trunks.outbound_registration = Require Registration
trunks.outbound_registration.tooltip = It defines, if is required to register against the remote server or VoIP provider
trunks.auth_rejection_permanent = Permanent Auth Rejection
trunks.auth_rejection_permanent.tooltip =
	If this option is enabled and an authentication challenge fails, registration will not be attempted again until
	the configuration is reloaded
trunks.max_retries = Max Retries
trunks.max_retries.tooltip = Maximum number of registration attempts
trunks.expiration = Expiration
trunks.expiration.tooltip = Expiration time for registrations in seconds
trunks.retry_interval = Retry Interval
trunks.retry_interval.tooltip = Interval in seconds between retries if outbound registration is unsuccessful
trunks.forbidden_retry_interval = Forbidden Retry Interval
trunks.forbidden_retry_interval.tooltip =
	It defines the time to wait before attempting registration again, after receive a 403 Forbidden response.
	If 0 is specified, no retry will be made after receiving a 403 Forbidden response
trunks.match = Match
trunks.match.tooltip =
	The value is a comma-delimited list of IP addresses or hostnames. IP addresses may have a subnet mask appended.
	The subnet mask may be written in either CIDR or dotted-decimal notation. Separate the IP address and subnet mask
	with a slash ('/').
trunks.general_conf  = General Configurations
trunks.transport = {profiles_pjsip_transport}
trunks.transport.tooltip = Explicit transport configuration to use
trunks.validation.pjsip.no_remote_credentials = The outbound registration has been marked as required, but the remote username or the remote secret has not been defined
trunks.custom_dial_string = Dial String %s
trunks.custom_dial_string.tooltip =
	Custom dial string to use during the dialing of this trunk. Use the variable $[EXTEN] wherever the number to dial should go.
	e.g: OH323/$[EXTEN]@10.0.1.200:10060
trunks.validation.no_dial_string = You have not provided a valid dial string
trunks.tenant_trunk = Tenant
trunks.tenant_trunk.tooltip = It allows you to define to which tenant will be routed the calls made through this trunk.
trunks.validation.no_tenant = You have not selected a valid tenant for this trunk
trunks.max_reached = You have reached the maximum number of trunks allowed
trunks.custom_headers = Custom Headers
trunks.trkcustom.header = Header
trunks.profile_id = {hot_desking.profile_id}
trunks.profile_id.tooltip = {hot_desking.profile_id.tooltip}
trunks.dtmfmode = {hot_desking.dtmfmode}
trunks.contacts = Contacts
trunks.contacts.tooltip =
	Permanent contacts assigned to an AoR. You can define multiple contact addresses in SIP URI format. <br>
	e.g.: sip:198.51.100.1:5060
trunks.validation.pjsip.no_outgoing_host = The registration parameter is enabled but the remote host parameter hasn't been provided
trunks.client_uri = Client URI
trunks.client_uri.tooltip =
	This is the address-of-record for the outbound registration (i.e. the URI in the To header of the REGISTER).
	For registration with an ITSP, the client SIP URI may need to consist of an account name or number and the provider's
	hostname for their registrar, e.g. <b>sip:1234567890@sip.example.com</b>. This may differ between providers.<br><br>
	For registration to generic registrars, the client SIP URI will depend on networking specifics and configuration
	of the registrar.
trunks.server_uri = Server URI
trunks.server_uri.tooltip =
	This is the URI at which to find the registrar to send the outbound REGISTER. This URI is used as the request URI
	of the outbound REGISTER request from Asterisk. <br><br>For registration with an ITSP, the setting may often be just the
	domain of the registrar, e.g. <b>sip:sip.example.com</b>.
trunks.validation.pjsip.no_contacts =
	No contacts and no host has been defined. When contacts are not defined you must provide remote host to build default contact URI
trunks.contact_user = Contact User
trunks.contact_user.tooltip =
	sets the SIP contact header's user portion of the SIP URI, this will affect the extension reached in dialplan when
	the far end calls you at this registration.
trunks.overwrite_cid.yes = {trunk_group.overwrite_cid.yes}
trunks.overwrite_cid.no = {trunk_group.overwrite_cid.no}
trunks.overwrite_cid.if_not_provided = {trunk_group.overwrite_cid.if_not_provided}
trunks.overwrite_cid.yes.tooltip = It forces to overwrite the CID with the CID parameters defined on this trunk
trunks.overwrite_cid.no.tooltip = {trunk_group.overwrite_cid.no.tooltip}
trunks.overwrite_cid.if_not_provided.tooltip = {trunk_group.overwrite_cid.if_not_provided.tooltip}
trunks.none = -- None --
trunks.qualify_frequency = {profiles_pjsip_qualify_frequency}
trunks.qualify_frequency.tooltip = {profiles_pjsip_qualify_frequency_tooltip}
trunks.qualify_timeout = {profiles_pjsip_qualify_timeout}
trunks.qualify_timeout.tooltip = {profiles_pjsip_qualify_timeout_tooltip}
trunks.outbound_proxy = {profiles_pjsip_outbound_proxy}
trunks.outbound_proxy.tooltip = {profiles_pjsip_outbound_proxy_tooltip}
trunks.fax_settings = Fax Settings
trunks.t38_udptl_ec = Error Connection Method
trunks.t38_udptl_ec.tooltip = T.38 UDPTL error correction method
trunks.t38_udptl_ec.none = {none}
trunks.t38_udptl_ec.none.info = No error correction should be used.
trunks.t38_udptl_ec.fec = FEC
trunks.t38_udptl_ec.fec.info =Forward error correction should be used.
trunks.t38_udptl_ec.redundancy = Redundancy
trunks.t38_udptl_ec.redundancy.info = Redundancy error correction should be used.
trunks.t38_udptl_maxdatagram = MAX Datagram
trunks.t38_udptl_maxdatagram.tooltip =
	T.38 UDPTL maximum datagram size. This option can be set to override the maximum datagram of a remote endpoint for
	broken endpoints.
trunks.fax_detect_timeout = Detection Timeout
trunks.fax_detect_timeout.tooltip =
	The option determines how many seconds into a call before the fax_detect option is disabled for the call. Setting
	the value to zero disables the timeout.
trunks.t38_udptl = T.38 UDPTL
trunks.t38_udptl.tooltip =
	If set to yes T.38 UDPTL support will be enabled, and T.38 negotiation requests will be accepted and relayed.
trunks.fax_detect = Fax Detect
trunks.fax_detect.tooltip = Whether CNG tone detection is enabled
trunks.t38_udptl_nat = T.38 UDPTL NAT
trunks.t38_udptl_nat.tooltip = Whether NAT support is enabled on UDPTL sessions
trunks.t38_udptl_ipv6 = T.38 UDPTL IVP6
trunks.t38_udptl_ipv6.tooltip = Whether IPv6 is used for UDPTL Sessions
trunks.max_contacts.tooltip =
	Maximum number of contacts that can associate with this AoR. This value does not affect the number of contacts that
	can be added with the "contact" option. It only limits contacts added through external interaction, such as registration.
trunks.disable_hangup_audios = Disable Hangup Audios
trunks.disable_hangup_audios.tooltip =
	If set to yes, the audios played depending on hangup cause will be disabled. Enabling this option comes in handy
	for those environments where the PBX is for transit calls usage.
trunks.dial_prefix = Dial Prefix
trunks.dial_prefix.tooltip = If defined, the prefix will be prepended to any number dialed through this trunk.
trunks.identify_by = Identify By
trunks.identify_by.tooltip =
	Endpoints and AORs can be identified in multiple ways. This option is a list of methods the endpoint can be identified.
	If no options are selected, the "Username" and "IP" will be used by default.
trunks.identify_by.username = Username
trunks.identify_by.ip = IP
trunks.identify_by.auth_username = Auth Username
trunks.identify_by.header = Header
trunks.identify_by.username.tooltip = Identify by the From or To username and domain.
trunks.identify_by.ip.tooltip = Identify by the source IP address.
trunks.identify_by.auth_username.tooltip = Identify by the Authorization username and realm.
trunks.identify_by.header.tooltip = Identify by a configured SIP header value.
trunks.match_header = Match Header
trunks.match_header.tooltip =
	A SIP header whose value is used to match against. SIP requests containing the header, along with the specified value,
	will be mapped to the specified endpoint. The header must be specified with a <b>:</b>, as in <b>match_header = SIPHeader: value</b>.
	The specified SIP header value can be a regular expression if the value is of the form <b>/ regex/</b>.
	Bear in mind that the use of a regex is expensive, so be sure you need to use a regex to match your endpoint.
profiles_pjsip_transport_tls-ms-teams = TLS + MS Teams
trunks.record = {vitalpbx.record}
trunks.record.tooltip = If set to yes, all the calls using this trunk will be recorded. It applies to outgoing calls only.
trunks.validation.ext_device_duplicated = The provided trunk username "{0}" is already used by the extension device "{1}."
trunks.contact_header = Contact Header
trunks.contact_header.tooltip = On outgoing requests, force the user portion of the Contact header to this value.
trunks.trust_id_inbound = Trust ID Inbound
trunks.trust_id_inbound.tooltip =
    This option determines whether Asterisk will accept identification from the endpoint from headers such as P-Asserted-Identity or Remote-Party-ID header.
    This option applies both to calls originating from the endpoint and calls originating from Asterisk. If no, the configured Caller-ID will always be used as
    the identity for the endpoint.
trunks.trust_id_outbound = Trust ID Outbound
trunks.trust_id_outbound.tooltip = When set to "Yes," the private identification information (PAI & RPI) will get sent to the provider when sending/making anonymous calls.
trunks.inband_progress = Inband Progress
trunks.inband_progress.tooltip = When set to "Yes," the system will indicate ringing using inband progress.
trunks.validation.pjsip.invalid_client_uri = The given "Client URI" is invalid. The format must be "sip:1234567890@sip.example.com."
trunks.validation.pjsip.invalid_server_uri = The given "Server URI" is invalid. The format must be "sip:sip.example.com."
trunks.validation.pjsip.invalid_contact = The contact "{0}" has an invalid format. The format must be "sip:sip.example.com."
trunks.validation.pjsip.invalid_match = The value "{0}" from the "Match" field is invalid. You must provide a valid IP/Domain.
